Using Stones To Create Perfect Landscape Edges
Adding stones to your lawn can give your garden a professionally trimmed look. It might seem simple at first, but this landscaping method involves complicated steps and requires a ton of detail. It might be a little challenging to hard-scape your lawn as a DIY project, with the wide variety of options available. You can make or break your landscape’s aesthetics depending on the option you choose. Landscaping Georgetown shows you how to create perfect stone edges in eight easy steps. Find out more.
The Eight Steps To Hardscaping Your Lawn
Step 1: Check for underground utilities
In order to ensure the safety and well-being of everyone involved in the hardscaping project, there are several steps to follow before commencing the work. The first step you should take is to contact a utility company to check for underground utilities on your lawn. This is to avoid hitting those pipes and wires while you are digging up. Surely you would not want to spend more money to fix a water line that you might have broken inadvertently.
Step 2- Choose the right stone
When it comes to choosing the perfect stones for your landscape, you have an array of options to choose from, such as natural sandstone, gravel, river rocks, pavers, and polished mixed stone. Nevertheless, the choice of stone should be determined by the outcome you hope to achieve and the location of the landscape. It would be a good idea to trust a professional landscaping company to choose the perfect hardscaping material for your garden.
Step 3: Designing and planning the outline
After you have chosen your stone, the next step is to plan and design your hard-scape. This includes determining the space where you need to lay down the stones or whether you are using any other hardscaping option on your lawn. The planning and designing stage is crucial for deciding the materials needed, the budget to be spent, and most importantly, the time to complete the project. An effective planning process also prevents reworkings later.
Step 4: Start digging
After the plans and designs are in place, it’s time to dig the trench. Pick up tools like a pick-ax, a shovel, or a hoe according to the soil type you’re working with. Based on the hardscaping materials you intend to use, trenches should be 5-8cm deep. Ensure that the soil around your trenches is loose to be used as a filler once the stones are laid down.
Step 5: Level up the ground with leveling sand
Leveling sands are finely crushed stones laid on the ground to provide a good foundation for the paver stones. After you have dug the trench, smooth out the loose soil, then add the leveling sand to even out any areas that may need raising. Compress the dirt and sand with a tamper after adding the leveling sand. The outcome will be smooth and leveled foundation ground for your stones.
Step 6: Laying down the stones
After your grounds have been leveled, you must lay the stones in the pattern you desire. In order to achieve a wider base and solid layer, it is advisable to place the larger stones on the bottom and the smaller ones on top. If the stones used are the same size, you can lay them down or overlap them in an alternating pattern.
Step 7: Leveling the stones
You can use a carpenter’s level to determine the stone’s alignment. This will ensure that the stones are level. Similarly, on the curved sections, you can use a torpedo level. Torpedo levels contain tubes containing yellowish-green fluid that indicates the perfect alignment of stones.
Step 8: Filling the gaps
The last step of the process is to fill in the open spaces between the stones. You can use the dirt left over from digging the trench. Wear gardening gloves to protect yourself from stones and dirt.